imodeler template

Imodeler – is a progam that uses photogrammetry to build a 3d model out of a series of digital photos.

Dsculptor is another program that does this too.

I have an old copy of the version 1 of Dsculptor that I got off of a magazine cd a long time ago, and have a copy of Imodeler that I purchased a few years back…

Up until now, I’ve know it was easy to blow up the D-sculptor template since the version 1 template was basically a sqaure that was bisected a couple of times, but I had lots of problems trying to figure out how to blow up the imodeler template.

Well, now that’s no longer the case. I have been emailing the developer of Imodeler, and they gave me the dimensions. Since it’s simply a “list” it should be ok to post here as far as copyright/trademark stuff goes. Also, they should be thanking me since their site does not list these dimensions exactly outright, so it’s hard for me and a lot of others to blow this thing up to get models of cars, people, etc. up til now…

Here’s the dimensions for the template according to the email (part of the reason I’m posting this out here instead of just keeping the email is that the email may get deleted on accident someday?…)

The points are all 1 “unit” wide and at the following positions (in the same units – be it cm or inches):
23, 1
26, 1
26, 4

23, 18
26, 18
26, 15
26, 12

1, 18
4, 18
7, 18
1, 15
1, 12

1, 4
1, 1
4, 1
7, 1

First number is along the axis pointing towards right, second up.

We had people scanning forklifts with this pattern, so bigger objects are definitely possible.

Have a good time trying to build that template! I’m so glad that this info is out here now. It would have been so very handy many years ago when I first got in to this stuff..


interesting reading – 3d Scanning on the cheap.

I read this article a while back and actually tried something like it a year or three ago… actually gave me a reason to buy a laser level! 🙂

Using I-modeler and/or d-sculptor is much easier since you don’t have to mess with lasers and stuff. I might try to get in to this sort of thing at some point in the future again.

Using d-sculptor about 6 years ago, I created a 3d image of my sister and brother in law. They were kind enough to stand still long enough for me to shoot them about 30 times from different angles to make it work.

Back then, I did that using a blown up d-sculptor grid – version 1 – the version 2 grid is a lot harder to blow up – version 1 is just a square that’s cut in half – so the dots are much easier to put on a blown up thing… I used 4 blocks of hardboard (masonite) that were taped together with duct tape to do that, and I made the dots on there with white china market and black sharpie pen and permanent marker to make it visible from a distance.

Imodler is much harder to blow up since it uses a proprietory algorithm in how far apart the dots are… pain in the butt to print out a 6 foot wide thing on 8 and a half x 11 paper to blow up the imodeler – but believe it or not I tried that at one point in time, lol. If I do this sort of thing again in the future, I’ll set up the hardboard so that it has both the Imodeler and Dsculptor grids on it simultaneously so that I can make the 3d meshes in both programs using the same digital photos… as one might work better then the other and/or be more “professional”

At one point in time, I thought I could do this sort of thing as a part time job – sort of set it up to do 3d scans for people at county fairs and things to get the kids on 3d models that could be used to make 3d prints, modify to create avatars in 3d games that looked like the people scanned, etc. However, never pursued the idea too far since it takes so long to shoot the images and the model has to stand still. It could work with a single snap from a bunch of photos all taken at once, but that would require a lot of helpers and/or some sort of automated system similar to the rigs they use in Hollywood to do stuff like is shown on the Matrix I movie dvd… it’d be possible but difficult, and pricey… otherwise, it’s a slow process that requires the model to stand perfectly still. Getting children, or even adults to stand still is not always the easisest thing in the world to do…

Maria’s Blog 4/18/2010

Over the weekend Maria bought a few QR 100 blueprints, and also outright bought some blueprints from both with high qr and low qr from a crafter that was doing consignment deals in Maria’s Shop, Delta Discounts. Maria has started to craft a little now too.

I used Bob the Builder’s website as a guide to help me figure out which blueprints to buy with high qr. I’m focusing on low cost materials to skill upon. Basic Auxillary Socket is what I’m crafting tonight. The ingredients for it are 1 lysterium ingot, and 2 oil. That is the same cost as standard dampers, but dampers are only TT food, like Basic Filers. I can sell Basic Aux. Socket in the shop, even though the markup on it is low… and also can sell whatever residue I get from it.

Before now, my high qr crafting was mainly filters and dampers, which is costly and not good since it’s all TT food, that is useless for any other thing in game, even though it is listed as a component – it’s not a component of anything. Aux sockets are a component of something..

A long time ago I had the dream of Maria skilling up on longblades and crafting to eventually become a longblade engineer. Right now, she’s up to level 2 in that profession… She can’t hunt much these days because slow computer graphics card gives her lag… but crafting machines don’t need fast graphics cards since no one is around much, and speed does not matter as much as with hunting… so hunted up til now, but now the focus on skilling side of things will be in crafting… When not doing that, I’ll be continuing to buy stuff as cheaply as possible and selling it in the shop, as I have been up til now.

If you ever get in to crafting in Entropia Universe, it’s costly but tools like Candyman’s site can help you figure things out a bit. Right now Maria only has a hundful of qr 100 blueprints, but they are the ones that are use cheap ingredients so that she can get lots of skills cheaply. She also has a LOT of blueprints in various books from the blueprint consignment deals she’s been doing with the shop, so she’s well on her way to becoming one of Entropia Universe’s best crafters in a few years. The shop ownership is only the first of many long term goals. The blueprint collection is part two of that. Now it’s time to build some skills in crafting!

p.s. I really love auto-crafting in Entropia Universe since it lets me type posts like this while also doing something in game. Very nice being able to multi-task.

Maria’s blog: 4/16/2010

I’ve not put a lot in to blogging from Maria Mesh’s perspective for a while. I think now is the time to start doing that. I type a lot on Entropiaforum, so sometimes get lost over there instead of typing over here…

Today, Maria sold her apartment, Omegaton West Habitat – Delta Tower, Apartment 1D to a society mate. Eventually, she may get the chance to buy it back at the same price, but only time will tell. The apartment was sold to free up some PED. Maria also sold a lot of empty books she had in resettlement storage when she was running the “lost library”… an idea that sort of fizzled because a lot of people did not seem interested in buying blueprints, even if they were TT priced. What bps she has left she’ll either sell in the shop or sell to friends at a good price.

Most of the rest of the empty books have the Technician bps in them, so I need to manually unload each and then sell them and the books themselves to the trade terminal. The Lost Library has served it’s purpose, it allowed me to “save” my peds that were tied up in all of these books up until now… I spent the money on them all so that I could basically waste my time moving stuff around in books and organizing them in a nice and neat way instead of wasting time in game doing other junk that would be throwing the money away, such as hunting, buying overpriced stuff I don’t need, but wanted, etc. It was a bit of a way of making the peds last instead of blowing them all at once. Now I have a clearer vision of what to do. I’m going to keep buying stuff at TT prices off of the auctions and selling in the shop. That way I can keep playing the game safely and not loosing a ton of money in high risk investments… so the need to have that many books to mess around with is not there as much any more. Each of the resettlement containers has around 100 books in them, each priced at 1 ped, and a good bunch of them had 2-4 blueprints in them at 1 pec each, bought from the technician… so each resettlement container had about 10 US dollars worth of peds in them… not a lot of money, but enough to make my need for peds now want me to sell them so that’s what I’m doing. It was also, in part a bit of a test on the servers to see how many items an avatar could hold. I discovered that an avatar can hold an almost unlimited amount of items if they are stacked in books, boxes, and other containers… you are not limited to the 200 item slots in inventory and 500 in storage for each planet as some may believe…

Since the apt. sold, Maria is left with two estate deeds – The Shop at Omegaton West Habitat, Delta Tower, Block A, Shop 1, and one of the booths behind it, Omegaton West Habitat, Delta Tower, Booth #3. She also bought a shopkeeper and manniquin a few days ago, which is part of the reason she’s in need of peds… and sold the apt. Shopkeeper cost her 3k, that is 300.00 US Dollars… and Manniquen was only 30.00 US Dollars. I thought you could sell items the manniquen wore as he wore them, but apparently I was wrong on that, so it may be a bad buy. I sent a support ticket in about it since I could have sworn I saw a manniquen do that a few years ago in one of the malls.

Out of the 100 books that were in one of the resettlement containers, only 25 are left that have blueprints… I’ll unload the other resettlement container later that has the component II books and other books later. Luckily, the technician and Trade Terminal don’t let you sell books to them that have blueprints in them, which makes it a lot easier to sell the empty books than it would be otherwise… I just throw them all in the sell tab and if they have blueprints in them they bounce back in to inventory.

A lot of crafters tend to throw away low level blueprints, that is sell them to the trade terminal, or hand them out to anyone on the streets. The idea behind the Lost Library was to gather up those throw aways and re-distribute them to other folks in exchange for other blueprints, etc. That worked up to a point, but it got to be very difficult to organize, so I eventually sort of gave up on the idea, and just started selling on consignment in my shop. With that I paid Trade Terminal prices to crafters, tried to sell the stuff, and then if we got profits I gave them profits back. There was a lot of work involved in keeping the google documents. I still have several things on consignment with several people, but will slowly either sell them back to them at TT value or outright buy them so I’m not left holding a lot of people’s stuff, where I could eventually get accused of being a scammer.

In Entropia Universe, your reputation is EVERYTHING… if you ever get accused of scamming, you might as well forget about playing the game for a year or two… it’s not really that bad, and I’ve never been accused of scamming because I never have scammed… but some people aren’t so smart… you are not as anonymous as you may think you are in a virtual world… I could write a lot of topics on that eventually.

Well, my hands are a little sore from typing this and moving all those blueprints from the resettlement boxes to inventory, and then to the sell tab of the technician, so I’ll write more at a later time. Have a nice day.

Maria’s getting another apartment. Loooong history…

This post is a lot longer than I thought it would be… what’s sad is a lot of details aren’t in here… a lot has happened in the last couple of years in Entropia Universe for my avatar… there’s enough plots and stuff in here and all that’s been going on with the NBK on the forums at Entropia Forum to make an entire mini-series or 19 of them, lol…
Maria mastermesh Mesh is about to purchase a second apartment again. She previously had 2 of them… but sold off one a few days ago. Now she’s getting a second one since it’ll be on the same floor as the one that she already has.

There’s a lot of history… now here a little back story for those of you that are in to reading about that sort of stuff…

In the Pre-Maria Days, I had heard of Entropia Universe, via However, it sounded like a crazy idea… then… there was this one post about some guy named Deathifier that had spent a lot and earned it all back… and another guy named Neverdie that had spent even more, and earned it all back… so then Maria came in to being…

Yes, the hype was mostly hype, but it was an interest way to spend time and some small amounts of money as I was home on weekends as my wife worked then… and a few months prior to that time, a casino had opened a few blocks away from where we lived… At the casino I could blow through 30 dollars in less than 20 minutes. IN Entropia Universe, I could survive on 30 dollars hunting snablesnots for a month, so it seemed like an interesting thing…

Maria started out her life in Entropia Universe as a poor homeless citizen, like all avatars are when they first begin the game, with nothing more on her back than an orange jumpsuit.

Then, Maria sweated a lot and finally got a little income through that. She also shortly got an income from a deposit from an Earthling and took up hunting. She axed her way across two continents with a few 2×0 axes that got bloodied up pretty fast and needed repair. Maria found that the axes were not very economic weapons eventually (no Skill Increase Bonus – SIB)…

Then, Maria took up hunting with a rifle. Her trusty rifle accompanied her everywhere. Her favorite hunting spots were, and still are locations that are not real busy spots. Prior to the recolonization of Calypso (Version Update 10), she hunted a lot around Fort Argus, Fort Zeus, North of Fort Ithica and radom other spots on occassion.

She no longer hunts much to the east of Argus since it is now a Player vs Player (PvP) Zone. She does still travel north of Argus on occassion. She’s also found a new hunting location that did not exist prior to the recolonization – EOS. She loves hunting Foul in the hills between EOS and Athena Space Base.

Back in the early days, Maria loved trading, and joined the Entropia Forum Dollar Growth Fund (EFD Growth Fund) Smart Trade Terminal Solution (STTS), and thought about joining Entropia Investment Fund (EIF).

STTS only existed for a short time and now no longer exists. EFD Growth Fund still exists on the forums at Entropia Forum. If you are a regular over there, you might think about joining the fund since the only investment requirement is Entropia Forum Dollars, not real money – although it is possible to buy or invest real peds to get EFD in that fund…

Luckily, Maria never joined EIF since they sunk a lot of money in to investments such as Land Areas, a mall shop, and a hanger, all of which have zero Trade Terminal Value. If Maria had bought in to that fund, her money would now be gone with little to no way of getting the money back since the EIF still exists but has no plans on ever selling out for any time in the near future it appears, so all peds that went in to those investments are now gone… The investments are bringing EIF some money, but it’s arguable how much since it’s likely that the original investment money is gone unless they ever sell their invested money, which they have no plans on doing… so until they get that money back, they have lost a lot of cash… Unfortunately, sometimes, to get ahead on Calypso that it is required to make big investments like that. I still think the EIF is extremely risky since there is no such thing as multiple owners of an asset in EU, and everything is based on trust. If the Fund manager dies or something, the assets he holds can be considered gone like the wind, along with all the Project Entropia Dollars (PEDs) that various individuals put in that invested in that stuff through the EIF.

Maria also thought about joining MMA Bigshow in his quest to create Entropia Holdings at one point in time. However, MMA is no longer in game, so Maria is glad she did not do that. MMA’s cockiness got the entire community irritated at him in the forums at entropia forum, even though he really probably had some ok ideas… I guess if you are martial artists that fights all the time, you might get too aggressive sometimes… and that may reflect in other areas of your life…

Maria jumped around to several different societies in the beginning of her journeys. For a while she was in The American Soldier (TAS), where she met some nice friends, including big Dodge Ram, and Fillipe Castanhas, among others.

Later, TAS was disbanded, and Fillippe talked Maria in to joining Entropia Asia Cadets (EAC), which was a cadet society for Entropia Asia. Maria was not Asian but joined anyways because some of her friends were there. Shortly thereafter EAC got blackmailed a little – one member of the society (I won’t name names here) bought a dot com for the Entropia Asia… and did so without consenting with anyone… in part because he ran an ISP… it was a nice site with it’s own forum and things… but wasn’t that great… Later, the higher ups in the society were asked to pay for that domain or something (not sure about all the details since I was a lowly cadet)… and the leaders of EAC broke off to start Zoku instead of staying as a cadet society for EA. At that time Cadets were given a choice – either stay in a dead cadet society, join Zoku, join EA, or go off on their own way. Maria decided to join Entropia Asia because Vortezy, Bryon, and some of the other folks over there were nice, and helpful.

Shortly after that, Maria went silent for 9 months because all deposits and activity from earth that powered her dissappeared (VU updates caused me not to be able to log in for 9 months til I got new hardware… could not even get past the login screen with the ol ATI-All-In-Wonder 9000 Pro and pentium III…).

When Maria awakend from her 9 month slumber, she was still EA, but it was a nearly dead society at least for her part of the world… There were still Asians in the society, but being located in the States, I could not see people in my society unless I stayed up til 3 am… which was a bad situation…

Maria decided to change directions if she was going to continue to survive on Calypso… so I started reading the forums… and I read them A LOT… Over time, I started thinking it’d be neat to cut some deals with shop owners, so I started studying the entropia forum and looking around at various shop owner’s avatars and visiting various terminals in game to see who owned what estates, etc. As a result, Maria met a lot of folks that owned shops in the Port Atlantis Mall and a few other places and befriended quite a few of them. She started trading things at Trade Terminal (TT) Value to some of those folks, including Nihilist, who happens to run EFD Growth Fund. Nihilist sort of became Maria’s mentor in the ways of running a shop successfully in game. He ran, and still runs a consignment shop called Dead Man’s Plunder… He buys things at TT value, trys to sell it in his shop, then pays back a percentage of profits…

Maria bought tons of things off of the auction for him, paying TT value for it. Some got accepted, others rejected. The rejected stuff, Maria did not know what to do with it… so she started trading it. Around this time, Vortexy, which is one of the leaders of EA started handing Maria lots of blueprints to sell too since he was crafting a lot… so she’d go sell his blueprints at Port Atlantis near the TP… and would also sell whatever else he handed her… she was a pretty good scounger in those days. She cut a few deals and met lots of traders… She actually started a non-society guild called United Buyers Exchange Resource (U.B.E.R.) and traded things to and from a lot of folks at TT values back then. It was fun and games, and no losses really since TT value was always growing, or getting traded off for something else to sell. STTS took that idea to a new level, but Josh Edwards (who ran STTS) only sold via auction, so he actually lost a lot of potential profit… and cost people that worked with him 100% of auction fees + 30% of the profits on top of that… pretty steep cost, but it was all junk people normally sold to the TT anyways, so it was not a bad deal… Maria eventually got in to that as an investor, and urged Josh to stop using the auction and get in to using a shop or something… He never listened, so she sold off her investment and moved on… There is still a massive void in EU that STTS filled that should be filled by someone, but is not currently being filled by anyone, so stuff gets sold in to the TT and avatars in the entire community get poorer and poorer because of that…

Around that time, NBK Entrepreneurs was formed by Hardwrath, someone who used to be leader of NBK, but had also been in a deep slumber, like Maria. Maria liked the enticing sound of being in NBK E, since she wanted to change her focus towards running a business and not being a ped loosing hunter the rest of her life… so she joined NBK Entrepreneurs… it got active about a year, had lots of great people in it – several shop owners (some of which Maria had brought in due to her U.B.E.R contacts, including Nihilist), an Land Area owner, and lots of traders… and some of the best crafters in all of the virtual universe…

Eventually though, a lot of the crafters wanted to do their own thing and focus on cutting deals with miners, so NBK Miners started, and NBK E was more or less abandoned by all but Maria and a few other dedicated folks. After that NBK E was forced by NBK leadership to become NBK Otium. Otium means “at ease.”

The idea from leadership is that Otium should be a place for the retired avatars to go that don’t fit in any other NBK society… a while before then, Nihilist quit because the promises that Hardwrath had made with a steady supply line being created when NBK E. first started out was never really brought in to being – it was, but only to benefit skilling crafters and miners, not shop owners… This and a lot of other things going on caused Otium to exist. I still am not sure I like otium since it sounds an awful like like Opium… but it’s started to grow on me a bit… sort of nice to not be under pressure to skill or cut business deals all the time even though I’m still doing some of each…

Anyways, at some point in time, prior to the recolonization, Maria purchased an apartment in Treasure Island. It was Apartment 10A in the Silver Building. The “Stack Exchange” was there, which was a service Maria ran to trade stacks of items among a lot of different individuals. Maria also had 2 shopkeepers that more money that magically appeared on her pedcard from a transfer from earth allowed her to buy. The real purpose behind the Stack Exchange was to get people in to the apartment to look at the shopkeepers and buy things. A few events were done with the NBK (Maria’s society)

Eventually, Maria bought a booth in the basement of the Delta Tower at Omegaton West Habitat… and bought Apartment 1A in the Delta Tower too… Those funds from earth helped her to make that happen…

and the Stack Exchange became the NBK TT shop… when Maria bought out the old NBK TT shop’s inventory and moved it in…

Then a few months later, the Treasure Island Silver apartment deed was traded for a deed to Apartment 4A in the Delta Tower… so Maria had 2 apartments and a booth all in the Delta Tower… 4A, 1A and Booth #3. She moved the NBK TT Shop and shopkeepers to the 1A apartment.. but that business never took off since the booth and shopkeepers were hidden away and not visible… then Maria moved everything out of the NBK TT shop apartment and converted it to a blueprint shop since NBK folks and others were continuing to TT Maria blueprints along with other things…

Then Maria did something radical and traded the two shopkeepers and booth in for the Shop 1 in Block A in Delta because the guy that owned that place, Rufwon, had been trying to sell it for a long time… Maria felt sorry for Rufwon and also found the idea of being visible from outside of the building to be nice…

So the Lost Library was established in Block A, Shop 1 of Delta Tower in Omegaton West Habitat. Maria owned Aparment 1A in the same building and 4A as well..

about 2 weeks ago, she sold 4A…

and now one of the folks that is selling blueprints in the Lost Library, who sniped 1D from Maria in an Auction at time when Maria was a little poor, is wanting to sell 1D…

So going Forwards, Maria mastermesh Mesh will own Apartments 1A and 1D, as well as Block A – Shop 1 in the Delta at Omegaton West Habitat. There’s also potential to eventually buy the booth back or buy another booth too, leaving lots of room to expand the shop at some point in the future, both horizontally, and vertically at some point in the future… The costs of expanding looks way too pricey right now, but I’m going to hold the deeds because that price may not look so bad in the future… I never thought that 2 years ago I’d join the NBK, much less own an estate… or three estates!!!… You never know what will happen in the virtual universe… the future is bright now that I have 3 estates in the same building… lots of potential room to grow eventually, even if the costs aren’t justified for that growth yet… Hopefully I can find a way to make that justification change and get profitable at the same time! 🙂